Specifications:
| Channels | |
|---|---|
| ICP® Sensor Input Channel(s) | 1 |
| Output Voltage (Instantaneous) | ± 10 V |
| Output Voltage (Peak) | 0 – 10 V (Rate of decay: 1mV/sec) |
| Frequency Response (Instantaneous) | 2 kHz or 10 kHz selectable |
| Low Frequency Response, AC coupled (-5%) | 0.5 Hz |
| Low Frequency Response, DC coupled | 0 Hz (Governed by sensor time constant) |
| Voltage Gain (Incremental Steps) | x0.5, x1, x2, x4, x8, x10, x16, x20 |
| Autozero Accuracy | ± 35mVDC |
| Environmental | |
| Operating Temperature | 15 to 50°C (60 to 120°F) |
| Electrical | |
| Voltage supply | 24VDC @ 200 mA ± 10% |
| Current Draw | 100 mA |
| Broadband Electrical Noise (1 Hz to 10 kHz) | 20 μV rms |
| Digital Input (1) - Peak Hold Reset | Optically isolated |
| Digital Outputs (2) | Solid-state relay |
| 0-24VDC / 50mA resistive load | |
| 1uA (off-state leakage) | |
| Switching delay 2msec (ON) / 1msec (OFF) | |
| Threshold Compare Conditions | High output energize (peak value> Hi limit) |
| Low output energize (peak value> Lo limit) | |
| Physical | |
| Mounting | DIN rail. |
| Dimensions – H x W x L | 112 x 23 x 91 mm (4.41 x 0.91 x 3.58 in) |
| Electrical Connector (Sensor Input) | SMA |
| Electrical Connector (Analog Output, Peak Output, Power, Ground) |
Removable Screw Terminals |
Note: This product conforms to applicable European Directives for CE marking.
PSC 200
Process Signal Conditioner
Threshold Monitoring Device
Allows you to set upper and lower threshold limits with resulting action when machine performance falls outside of the tolerance.
Used for...
- Stamping
- Crimping
- Clinching
- Forming
- Press Fit
- Load Balancing
- Welding
- Material Presence
- Riveting
- Tool Wear Monitoring
- Part Misalignment
- Assembling
- Product Testing
Key Features and Function:
- Continuous force feedback on manufacturing, assembly, on-line processes or product testing
- Analog and Peak Hold outputs allow for real-time process monitoring with machine control devices
- Allows older PLC systems to keep in synch with high-speed process cycles
- High-resolution analog output (0-10V) can be directly correlated to units of force
- Auto-zero and remote reset features to synchronize with process cycles
- Digital input resets value, ensuring reliable force monitoring and faster machinery production cycles
- Manage a wide range of production:
- High-speed production cycles
- Very long process cycles; continuous feedback through the cycle
- DIN rail mount for convenient installation
