Specifications
| Channels | |
|---|---|
| ICP Sensor Input Channel(s) | 1 |
| Output Voltage (Instantaneous) | ± 10 V |
| Output Voltage (Peak hold) | 0 – 10 V (Rate of decay: 1mV/sec) |
| Frequency Response (Instantaneous) | 2 kHz or 10 kHz selectable |
| Low Frequency Response, AC coupled (-5%) | 0.5 Hz |
| Low Frequency Response, DC coupled | 0 Hz (Governed by sensor time constant) |
| Voltage Gain (Incremental Steps) | x0.5, x1, x2, x4, x8, x10, x16, x20 |
| Autozero Accuracy | ± 35mVDC |
| Environmental | |
| Operating Temperature | 15 to 50°C (60 to 120°F) |
| Electrical | |
| Voltage supply | 24VDC @ 200 mA ± 10% |
| Current Draw | 100 mA |
| Broadband Electrical Noise (1 Hz to 10 kHz) | 20 μV rms |
| Digital Input (1) - Peak Hold Reset | Optically isolated |
| Digital Outputs (2) | Solid-state relay |
| 0-24VDC / 50mA resistive load | |
| 1uA (off-state leakage) | |
| Switching delay 2msec (ON) / 1msec (OFF) | |
| Threshold Compare Conditions | High output energize (peak value> Hi limit) |
| Low output energize (peak value> Lo limit) | |
| Physical | |
| Mounting | DIN rail. |
| Dimensions – H x W x L | 112 x 23 x 91 mm (4.41 x 0.91 x 3.58 in) |
| Electrical Connector (Sensor Input) | SMA |
| Electrical Connector (Analog Output, Peak Output, Power, Ground) |
Removable Screw Terminals |
Note: This product conforms to applicable European Directives for CE marking.
PSC 300
Process Signal Conditioner
Threshold Monitoring Device With Built-In Interface
Provides the advantage of an integrated set-point interface, meaning there is no need for external adjustments.
Used for...
- Stamping
- Crimping
- Clinching
- Forming
- Press Fit
- Load Balancing
- Welding
- Material Presence
- Riveting
- Tool Wear Monitoring
- Part Misalignment
- Assembling
- Product Testing
Key Features and Function:
- Continuous force feedback on manufacturing, assembly, on-line processes or product testing
- Analog and Peak Hold outputs allow for real-time process monitoring with machine control devices
- Allows older PLC systems to keep in synch with high-speed process cycles
- High-resolution analog output (0-10V) can be directly correlated to units of force
- Auto-zero and remote reset features to synchronize with process cycles
- Digital input relay resets value, ensuring reliable force monitoring and faster machinery production cycles
- Manage a wide range of production:
- High-speed production cycles
- Very long process cycles; continuous feedback through the cycle
- DIN rail mount for convenient installation
