Specifications:
| Performance | |
|---|---|
| Analog Inputs (X and Y-Axis) | AC/DC coupled, Current (ICP) or Voltage, Inverting/Non-Inverting (software selectable) |
| Sampling Rate | 20 kHz |
| Voltage Gain (Incremental Steps) | x0.5, 1.0, 2.0, 2.5, 4.0, 5.0, 8.0, 16.0 |
| Environmental | |
| Operating Temperature | 15 to 50°C (60 to 120°F) |
| Electrical | |
| Voltage supply | 85-264VAC – 47-63Hz |
| Broadband Electrical Noise (1 Hz to 10kHz) | 20 µV rms |
| Input 1 through 8 | 24VDC discrete input |
| Output 1 and 5 | 125VAC @ 3A – relay, dry contact |
| Output 2 and 6 | 30VDC @ 2A – relay, dry contact |
| Output 3 and 4 | 24VDC @ 400mA – MOSFET |
| Physical | |
| Mounting | Universal mounting bracket |
| Dimensions – H x W x L | 65mm x 190mm x 115mm |
| Electrical Connector - Sensor Input | SMA, M12 |
| Electrical Connector -Digital Inputs/Outputs | M12, 4/5-pin male/female |
| Communications | (all unsupported in the current release) |
| USB (for future use) | USB 2.0 |
| Ethernet (for future use) | RJ45 - Auto-Sensing 10Base-T or 100Base-TX – User configurable DHCP or Static IP |
| RS232 (for future use) | Optional RS232 communication adapter available |
Note: This product conforms to applicable European Directives for CE marking. OES reserves the right to make changes without further notice herein.
PVM 5000
Process Variation Monitor
Monitor 100% Of The Production Run Without Adding Time Or Processing Steps!
Proactive system measures the process variance on a machine for each production cycle, detecting even small problems at the source… well before they become quality issues.
Fundamental theory behind PVM:
If a process (including inputs, force, and tooling) is known to be capable of producing only good parts, and the process is consistent and repeatable, then the output of good parts should be consistent also. It's simply about determining the quality and stability of the process.
Key Features:
- Stand alone monitor - easy to retrofit onto existing equipment
- Wide range of sensor options including strain, force, displacement, pressure, motor load, etc.
- Analysis of process vs. time or distance
- Menu-driven navigation for ease of set-up and operation
- Password protection (assign levels of authority and control)
Capabilities:
- Detection of process variation that may lead to product quality issues
- Capture defects before more manufacturing value is added
- Machinery out of adjustment
- Reduce scrap cost
- Detection of process variation that may lead to equipment failure
- Interruption of process to help prevent catastrophic damage to the machine and isolate defective product
- Continuous process feedback – to help improve efficiency
- Lubrication issues, adjustment, tool wear, set-up verification, etc.
