Wire Processing & Process Monitoring Products

Process Monitoring


  • Converts strain or force information into standard control signals, allowing effective force forming application monitoring.
Analog and Peak Hold outputs allow for real-time process monitoring with machine control devices
  • Allows older PLC systems to keep in synch with high-speed process cycles
  • High-resolution analog output (0-10V) can be directly correlated to units of force
  • Provides continuous feedback through entire process cycle.
Auto-zero and remote reset features to synchronize with process cycles
  • Digital input resets value, ensuring reliable force monitoring and faster machinery production cycles
  • Manage a wide range of production processes from high speed to very long cycles
Sensor Options IEPE/ICP® Force and Strain
Channels 1
Analog Output(instantaneous) ± 10 V
Analog Output(Peak) 0 – 10 V
High Frequency Response 10 kHz
Low Frequency Response, AC coupled (-5%) 0.5 Hz
Low Frequency Response, DC coupleds 0 Hz (Governed by sensor time constant
Broadband Electrical Noise (1 Hz to 10 kHz) 20 μV rms
Discharge Time Constant 1 sec
Voltage Gain (Incremental Steps) x0.5, x1, x2, x4, x8, x10, x16, x20
Operating Temperature 0 to 50°C (32 to 122°F)
Voltage supply 24 VDC @ 200 mA ± 10%
Reset Input Optically Isolated
Mounting Din Rail
Dimensions – H x W x L 112 x 23 x 91 mm (4.41 x 0.91 x 3.58 in)
Electrical Connector (Sensor Input) SMA
Electrical Connector (Analog Output, Power, Ground) Removable Screw Terminals
Note: This product conforms to applicable European Directives for CE marking. ICP® is a registered trademark of PCB Piezotronics